Commell LS-372 User Manual

-1- LS-372 3.5 inch miniboard User’s Manual Edition 1.3 2015/06/17

LS-372 User’s Manual -10- 1.4 <Block Diagram> 1 X DVI LVDS 1x 200 Pin DDR2 533/667up to 2GB GME965 ICH8M1x Serial ATA port PCI Express 1x 6 x U

LS-372 User’s Manual -11- Chapter 2 <Hardware Setup> 2.1 <Connector Location>

LS-372 User’s Manual -12- 2.2 <Jumper Location & Reference> Jumper Function JAT Power mode select

LS-372 User’s Manual -13- Jumper: JAT Type: onboard 3-pin header 2.3 <Connector Reference&g

LS-372 User’s Manual -14- 2.3.2 <External Connectors> Connector Function RemarkUSB One USB connector

LS-372 User’s Manual -15- 2.4 <CPU and Memory Setup> 2.4.1 <CPU Setup> The board comes with the so

LS-372 User’s Manual -16- 2.4.2 <Memory> T The board provides one 200-pin DDR2 SO-DIMM to support DDR2 5

LS-372 User’s Manual -17- 2.5 <CMOS Setup> The board’s data of CMOS can be setting in BIOS. If the board

LS-372 User’s Manual -18- 2.6 <Enhanced IDE Interface> The board has one UltraDMA33 IDE interface to sup

LS-372 User’s Manual -19- 2.7 <Serial ATA Interface> Based on Intel ICH8M, the board provides one Serial

-2- Copyright Copyright 2007, all rights reserved. This document is copyrighted and all rights are reserved. The information in this document is sub

LS-372 User’s Manual -20- 2.8 <Ethernet Interface> The board integrates with one Intel PCI Express Gigab

LS-372 User’s Manual -21- 2.9 <Onboard Display Interface> Based on Intel GME965 chipset with built-in GM

LS-372 User’s Manual -22- 2.10.2 <Digital Display> The board provides one 40-pin LVDS connector for 18/2

LS-372 User’s Manual -23- Connector: CN_INV Connector: JVLCD Type: 5-pin LVDS Power Header Typ

LS-372 User’s Manual -24- To setup the LCD, you need the component below: 1. A panel with LVDS interfaces. 2.

LS-372 User’s Manual -25- After setup the devices well, you need to select the LCD panel type in the BIOS.

LS-372 User’s Manual -26- 2.10.3 <HDTV Interface> The board provides an HDTV interface with Intel GME 9

LS-372 User’s Manual -27- 2.11 <Integrated Audio Interface> The board integrates onboard audio interfac

LS-372 User’s Manual -28- Connector: CN_AUDIO Type: 10-pin (2 x 5) 1.27mm x 2.54mm-pitch header Pin Descript

LS-372 User’s Manual -29- 2.12 <GPIO Interface> The board provides a programmable 8-bit digital I/O inte

-3- Hardware: LS-372 mini-board x 1 Cable Kit: 44-pin 44-pin40-pinATA33 IDE Cable x1 SATA Cable x 1 YPbPr Cable x 1 SATA P

LS-372 User’s Manual -30- 2.13 <Power Supply> 2.13.1 <Power Input> The board requires DC 12V input

LS-372 User’s Manual -31- 2.13.2 <Power Output> The board provides one 4-pin connector for +5V/+12V out

LS-372 User’s Manual -32- 2.14 <Switch and Indicator> The JFRNT provides front control panel of the boar

LS-372 User’s Manual -33- Chapter 3 <System Setup> 3.1 <Audio Configuration> The board integrat

LS-372 User’s Manual -34- 3.2 <Video Memory Setup> Based on Intel® GME965 chipset with GMA (Graphic M

LS-372 User’s Manual -35- Fixed + DVMT Memory Size: You can select the fixed amount and the DVMT amount at

LS-372 User’s Manual -36- 3.3 <Display Properties Setting> Based on Intel GME965 GMCH with GMA X3100

LS-372 User’s Manual -37- 3. This setup options can let you define each device settings. Click

LS-372 User’s Manual -38- Chapter 4 <BIOS Setup> The motherboard uses the Award BIOS for the syste

LS-372 User’s Manual -39- Appendix A <I/O Port Pin Assignment> A.1 <IDE Port> Connector: IDE1 Type: 44-p

-4- USB Cable x 1 CPU Cooler x 1 COM Port Cable x 1Printed Matters: Driver CD x 1 (including User’s Manual)

LS-372 User’s Manual -40- A.2 <Serial ATA Port> Connector: SATA Type: 7-pin wafer connector 1 2 3 4 5 6

LS-372 User’s Manual -41- A.4 <Serial Port > Connector: CN_COM1/2 Type: 20-pin (10 x 2) 1.27mm x 2.54mm-pitc

LS-372 User’s Manual -42- A.6 <LAN Port> Connector: RJ45 Type: RJ45 connector with LED on bracket A.7 <

LS-372 User’s Manual -43- Appendix B <Flash BIOS> B.1 <Flash Tool> The board is based on Awa

LS-372 User’s Manual -44- Appendix C <System Resources> C1. <I/O Port Address Map>

LS-372 User’s Manual -45-

LS-372 User’s Manual -46- C2. <Memory Address Map>

LS-372 User’s Manual -47- C3. <System IRQ & DMA Resources> DMA: IRQ:

LS-372 User’s Manual -48- Appendix D <Programming GPIO’s> The GPIO’can be programmed with the MSDO

LS-372 User’s Manual -49- Appendix E <Programming Watchdog Timer > The watchdog timer makes the sy

LS-372 User’s Manual -5- Index Chapter 1 <Introduction> ... 7 1.1 <

LS-372 User’s Manual -50- Appendix F <How to setting COM2 & IrDA> Jumper: JCSEL Type: onboard

LS-372 User’s Manual -51- Contact Information Any advice or comment about our products and service, or

LS-372 User’s Manual -6- 3.1 <Audio Configuration>...33 3.2 <Video Memory Setup>..

LS-372 User’s Manual -7- Chapter 1 <Introduction> 1.1 <Product Overview> LS-372 is the new generation of the 3.5 inch miniboard, with supp

LS-372 User’s Manual -8- 1.2 <Product Specification> General Specification Form Factor 3.5 inch miniboard CPU Support Intel Core 2 Duo Mobile

LS-372 User’s Manual -9- 1.3 <Mechanical Drawing> ‘‘‘‘‘‘‘‘‘‘‘‘‘‘